Reasons why you should adapt LED technology


Reasons why you should adapt LED technology

Regarding the purchase of LEDs, you have 2 real options. Buy a brand new luminaire or replace the bulb and ballast of your existing luminaire with the LED. Here is a simple list of 5 items to consider in determining whether retro installation is a good option for you.

flush mount lighting | flush mount ceiling light

1. You have a large investment in your existing devices.
You can sit on a big investment in indoor or outdoor mounting. Everything is integrated. The heads correspond to the sticks. With a new device, you would have to throw away your investment of something that looks great and has absolutely nothing wrong with that.
Enter LED Conversations! This process involved the removal of the bulb, ballast. socket and reflector (there is no light to reflect, the LED is directional lighting) and replace the bulb with an LED head and ballast by LED driver. The head uses a supplied mounting bracket that screws directly into the same holes as the bracket, and the driver mounts at the same location as the ballast. You do not need to drill new holes. The typical installation time is about 15 minutes after you have determined the proper configuration for your device.

2. There is nothing wrong with your existing devices.
Your lights are in perfect condition. They are waterproof and work perfectly well. But you want to convert to LEDs and realize all the savings associated with that. Many of manufacturer retrofit solutions will easily fit in 99% of devices currently containing a HID bulb, such as metal halide or high pressure sodium.

3. The city or county code requires permissions to install new devices.
Your city or county may ask you to request and obtain approval for replacing an existing fixture with a new one. Maybe the facilities are of a historical nature. They may be concerned about the loads generated by the new devices. These permits can cost you time and money.

With a catch-up solution, you can usually bypass all this paperwork. You are doing nothing but swapping an old light bulb with a highly efficient LED solution. In most cases, converting to LED technology in renovations can save you money and headaches.

4. You get the same benefits of a new LED light at a lower cost.
The programs are not cheap. Perfectly recycling good devices are not cheap either. When you replace a bulb or ballast, you get all the benefits of converting to LEDs without the additional costs associated with conversion. And despite what others will say
LED conversion kits are ETL listed and will not affect the UL status of your existing device as long as you follow the instructions.
Some of manufacture have Retrofit solutions and qualified DLC Premium and they are eligible for discounts.
DO retrofit solutions last a long time. They are giving guaranteed for 3 to 7 years.

5. The installation is usually simpler with the use of an adaptation solution.
Installation of a retrofit solution can be performed by an electrician. It sometimes takes 2 electricians to install a new device. The installation time of a retrofit solution may not exceed 15 minutes per appliance, after the electrician has determined the mounting bracket and optimal installation procedures.
Click here for more information.

Comments

Post a Comment

Popular posts from this blog

Avoid adaptive solutions that use adapters

Image
Avoid adaptive solutions that use adapters We have seen them all. Modernization units delivered with a socket adapter, typically E39, allow you to screw them into the socket of the devices. Good idea no? False. Read this so you do not get caught in an expensive mistake. Some kits include an adapter that allows you to screw into the existing socket of a device. Although this sounds like a good idea and you even think that it saves installation time, this type of method poses two serious problems. LED conversion units weigh more than HID / metal halide bulbs This can not be discussed. The power outlet is designed to hold a HID bulb and not an LED conversion unit. LED conversion units are more than 5 times heavier than a bulb. Add to that that the plug can be old and fragile. Or he can be mounted on a pole, vibrate and swing with the wind. This will cause the plug to fail and your investment in a conversion unit may break against the fixture glass and be damaged. All the t...
Read more

Choose right color temperature

Image
Choose right color temperature It is important to choose the right color temperature when choosing LED lights, and the color temperature will be different depending on the application. Here is a list to help you make your decision to choose color 1. The color temperatures to be taken into account are between 2700K and 6500K. 2. Color temperatures on the lower end (2700K) tend to be warmer (yellow in color). 3. Higher color temperatures (6500K) tend to be colder (blue in color). 4. A good color temperature to replace MH and HID is 5000K. 5. A good color temperature to replace high pressure sodium is 4000K. You can also choose 2700 or 3000K if you like the appearance of a yellow light. 6. 4000K is an excellent indoor color temperature for offices, schools, hospitals and other fields of activity. 7. 3000K is an ideal color temperature for the home. It contains very little blue light, is soft and warm. In addition to these tips, there is no difference b...
Read more

What’s important to know about the power factor?

Image
What’s important to know about the power factor? The power factor (PF) of an LED or driver indicates the ratio of the power actually used. This is the amount of watts used by the light relative to the apparent power absorbed in the lamp circuit. So, why is it important?   The PF gives a measure of the distance between your charge and that of an incandescent bulb, which has a PF of 1. Historically, incandescent bulbs had an almost perfect power factor. All LEDs and drivers are measured against this base.   A low power factor is also a sign of an inefficient product or light because it consumes more power in the circuit than the load uses. In other words, if you expect to consume only 100 W of energy, you can consume a lot more because of the low PF ratio.   When you choose LED devices or conversion units with higher power factors, this minimizes the current capacity of the components in your lighting circuit. This includes dimmers and cables as the pr...
Read more